 Worldwide | All Chuck's ads | Member #159722 | Status: Unverified | Since: April 2008 |
CLEAR TBRKT W/ RTRN SPRING - $69.00
- Condition: New
- Make/Model: Edelbrock Carb
Clear TBRKT w/ Rtrn Spr Fits Edelbrock Carb Accepts Mopar
available for Ford, Gm, or Mopar
These uniquely-designed throttle bracket assemblies are the answer to securely holding your throttle cable. They are furnished with a specially designed carburetor return spring mount which attaches to the carburetor for a clean installation and smooth return spring operation. Each bracket is crafted from ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website    |
1/2" 4 HOLE SPACER AND GASKETS KIT - $69.00
- Condition: New
1/2" 4 HOLE SPACER AND GASKETS Kit with Studs - $69
A 4 hole spacer will improve Idle quality, bottom end tork, throttle response and 60' times.
In most applications the benefits of the 4 hole spacer is what we're looking for. So you've made the decision go with a 4 hole spacer, but there is dozens to choose ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
NEW HIGH PERFORMANCE DISTRIBUTOR CAP
- Condition: New
- Make/Model: Cap / Rotor for V-8
Mopar only
Mopar Tan Color, with Brass Contacts
with the Rotor
$5.00 S&H Lower 48
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
COMETIC HEAD GASKET HONDA VTEC - $75.00
- Condition: New
- Make/Model: Cometic Multi-Layer
Cometic Multi-Layer Steel Head Gasket
for Integra B16, Civic SI or B18 DOHC VTEC
Specify bore sixe
81 to 85mm
Specify Thickness
.027, .030, .036 .040 .045, .051
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
AIR FILTER LID AND BASE SPUN ALUMINUM - $89.00
- Condition: New
- Make/Model: Air Filter
Air Filter Lid and Base Spun Aluminum Construction kit
Full 1.25" Drop BaseSpun Aluminum Construction
Full 1.25" Drop Base
Center or Offset design
Track Proven
$10.00 S&H Anywhere Lower 48
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail |
BB. MOPAR WATER PUMP - $199.00
- Condition: New
- Make/Model: MADE IN USA by PRP.
MADE IN USA.-SUITABE FOR CONTINUOUS DUTY
PRP continues to be on the cutting edge of technology with this billet electric water pump. Each pump is CNC machined from 6061 aluminum and anodized for long lasting corrosion protection. Each pump flows 50GPM with its billet impeller and houses a heavy-duty 12V Made In USA electric motor. Each unit is fully ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
BARRY GRANT DEMON CARBURATOR - $575 - $575.00
- Condition: New
- Make/Model: The new Mighty Demon
The new Mighty Demon™ is perhaps the best value for the dollar in the carburetor market today.
It is available in a full range of sizes and directly replaces Holley® HP models. It features billet-aluminum metering blocks, billet aluminum baseplates, large capacity fuel bowls complete with patented sight glasses and patented, streamlined air entries. Some of these features are found ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
NEW HIGH PERFORMANCE RADIATOR - $299.00
- Condition: New
- Make/Model: 64-66 Ford Mustang
New High Performance Radiator Fits 64-66 Ford Mustang
Height 20 1/4" x Width 18 1/2" x Thickness 2 1/2" W/TOC
Recommended Northern Low Profile Fan: Z40096 for V8 engines. For 6 cylinder use Z40008. Recommended Northern Engine Driven Fan Shroud: Z40025
Brand New in Box, Ships the Same Day,
Lists for $499.00
Measurements of heights ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
COMETIC MLS HEAD GASKETS FOR A FORD COSWORTH - $75.00
- Condition: new
- Make/Model: Pinto/ YB ...2.0L SOHC OHC, N
Cometic MLS Head Gaskets for a Ford Cosworth
Pinto/ YB ...2.0L SOHC OHC, NEP Engine
Cometic MLS Custom Head Gaskets
1 Cometic MLS (Multi-Layer Steel) head gasket cut to fit Ford applications
This gasket fits finished stock engine bore of 92.5 mm. and .040 Thickness
Part #C4218-040
$12.00 Anywhere in the Lower 48
NEW product.
Be ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
COMETIC MLS HEAD GASKETS FOR SB FORD - $135.00
- Condition: new
- Make/Model: 289/302/351 Windsor
Cometic MLS Custom Head Gaskets
1 pair of Cometic MLS (Multi-Layer Steel) head gaskets cut to fit most SB Ford. Engine applications with Steel or Aluminum Cylinder Heads.
Just give us your block, finished Engine bore, the desired thickness, and the heads your using, anything over .051" is a special order.
Contact us;
541-942-5920
Or E-mail us ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
|
