 |
Aten (IC164) Transceiver
The parallel interface has a serious limitation in that data can only be transmitted reliably over relatively short distances. This problem is solved with the lightweight, easy to use, IC-164T/IC-164R (Transmitter/Receiver) line extender pairs. The speed of the IC-164 outperforms any available product of its kind, and use of 4-wire telephone line virtually guarantees error free transmission. ...
| Check to compare:
$37 - $40
from 3 merchants |
 |
Adtran T1 CSU ACE (1203022L1) Transceiver
The T1 CSU ACE is a compact, full-featured T1 channel service unit used to connect T1 data terminal equipment (DTE) and T1 facilities. The unit is designed to provide alarms, loopbacks, signal regeneration, line build out, and surge protection. The unit is suitable for wall mounting or desktop use. Five LEDs on the front of the unit (POWER, NET LOS, EQ LOS, NET LB, and EQ LB) display the status of the unit. ...
| Check to compare:
$382 - $398
from 3 merchants |
 |
Omnitron Systems Omnitron FlexPoint T1/E1 (4470-1) Transceiver
Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in the power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility! ??The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode or single-mode fiber. Designed to extend the standard T1/E1 twisted pair and coax network distances over ...
| Check to compare:
$533 - $535
from 2 merchants |
 |
Aten (IC485S) Transceiver
Converters are used to transform one type of signal to another. Converters are extremely useful in situations where, the only port you have available uses an interface that is different from the device you need to connect to. In addition, there are some not-so-common standards that a converter can help access that might otherwise be impossible or too expensive to consider. ...
| Check to compare:
$38
from 1 merchant |
 |
StarTech.com (ICUSB232_4) Transceiver
Got more serial peripherals than you do ports? Dont sweat it, StarTech.com has the solution to your problem with the ICUSB232_4. It equips your system with four RS-232 serial ports while taking up only one USB port! Connecting devices like serial modems, GPS readers, serial printers, and PDAs has never been easier. ...
| Check to compare:
$86 - $89
from 3 merchants |
 |
Transition Networks (J/RS232-TF-01) (J/RS232-TF-01) Transceiver
Transition Networks’s ”Just Convert-IT” serial RS232 to Fiber Media Converter is an inexpensive, no frills way to extend the distance between serial connections with the use of fiber optic cable. This converter supports full or half-duplex data transmission at speeds up to 120Kb/s. Unit and Port LEDs allow for quick status information on the converter. ...
| Check to compare:
$142
from 1 merchant |
 |
Cisco (CWDM-SFP-1510=) (CWDMSFP1510) Transceiver
The Cisco CWDM SFPs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document Cisco CWDM SFP Compatibility Matrix ...
| Check to compare:
$600 - $1605
from 5 merchants |
 |
Transition Networks Just Convert-IT (J/RS232-CF-01(SC)) (JRS232CF01SC) Transceiver
Transition Networks' ”Just Convert-IT” serial RS-232 to Fiber Media Converter is an inexpensive, no frills way to extend the distance between serial connections with the use of fiber optic cable. This converter supports full or half-duplex data transmission at speeds up to 120Kb/s. Unit and Port LEDs allow for quick status information on the converter. ...
| Check to compare:
$150
from 1 merchant |
 |
General Electric S7711D (S7711DTEST1) Transceiver
The S7711D also features the unique data translation function that allows input of one data format and output of a different format. Data formats are selected during installation and can be easily changed in the field via rotary switch. ...
| Check to compare:
$1068 - $1146
from 3 merchants |
 |
Omnitron Systems Omnitron FlexPoint T1/E1 (4471-1) Transceiver
Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in the power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility! ??The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode or single-mode fiber. Designed to extend the standard T1/E1 twisted pair and coax network distances over ...
| Check to compare:
$798 - $810
from 2 merchants |
