 WorldwideMap |  | - Parts
|
CLEAR TBRKT W/ RTRN SPRING - $69.00
- Condition: New
- Make/Model: Edelbrock Carb
Clear TBRKT w/ Rtrn Spr Fits Edelbrock Carb Accepts Mopar
available for Ford, Gm, or Mopar
These uniquely-designed throttle bracket assemblies are the answer to securely holding your throttle cable. They are furnished with a specially designed carburetor return spring mount which attaches to the carburetor for a clean installation and smooth return spring operation. Each bracket is crafted from ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website    |
1/2" 4 HOLE SPACER AND GASKETS KIT - $69.00
- Condition: New
1/2" 4 HOLE SPACER AND GASKETS Kit with Studs - $69
A 4 hole spacer will improve Idle quality, bottom end tork, throttle response and 60' times.
In most applications the benefits of the 4 hole spacer is what we're looking for. So you've made the decision go with a 4 hole spacer, but there is dozens to choose ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
NEW HIGH PERFORMANCE DISTRIBUTOR CAP
- Condition: New
- Make/Model: Cap / Rotor for V-8
Mopar only
Mopar Tan Color, with Brass Contacts
with the Rotor
$5.00 S&H Lower 48
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
COMETIC HEAD GASKET HONDA VTEC - $75.00
- Condition: New
- Make/Model: Cometic Multi-Layer
Cometic Multi-Layer Steel Head Gasket
for Integra B16, Civic SI or B18 DOHC VTEC
Specify bore sixe
81 to 85mm
Specify Thickness
.027, .030, .036 .040 .045, .051
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
AIR FILTER LID AND BASE SPUN ALUMINUM - $89.00
- Condition: New
- Make/Model: Air Filter
Air Filter Lid and Base Spun Aluminum Construction kit
Full 1.25" Drop BaseSpun Aluminum Construction
Full 1.25" Drop Base
Center or Offset design
Track Proven
$10.00 S&H Anywhere Lower 48
Contact us;
541-942-5920
Or E-mail us;
chuck@hotrodholley.com
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail |
COMETIC MLS HEAD GASKETS FOR A FORD COSWORTH - $75.00
- Condition: new
- Make/Model: Pinto/ YB ...2.0L SOHC OHC, N
Cometic MLS Head Gaskets for a Ford Cosworth
Pinto/ YB ...2.0L SOHC OHC, NEP Engine
Cometic MLS Custom Head Gaskets
1 Cometic MLS (Multi-Layer Steel) head gasket cut to fit Ford applications
This gasket fits finished stock engine bore of 92.5 mm. and .040 Thickness
Part #C4218-040
$12.00 Anywhere in the Lower 48
NEW product.
Be ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
COMETIC MLS HEAD GASKETS FOR SB FORD - $135.00
- Condition: new
- Make/Model: 289/302/351 Windsor
Cometic MLS Custom Head Gaskets
1 pair of Cometic MLS (Multi-Layer Steel) head gaskets cut to fit most SB Ford. Engine applications with Steel or Aluminum Cylinder Heads.
Just give us your block, finished Engine bore, the desired thickness, and the heads your using, anything over .051" is a special order.
Contact us;
541-942-5920
Or E-mail us ... »
4.18.2008 / Chuck (Cottage Grove, Oregon)
Tel: 541-942-5920 Send e-mail Website |
| Member area |
