 Worldwide |
Change location
One second, please ...
 | - Other
|
TNT SURPLUS BUYERS
http://www.tntsurplusbuyers.com/
T&T Valves & Surplus is a Houston-based company that has been providing industrial services to customers in oil and gas, pulp and paper, petrol-chemical refineries, as well as pharmaceutical companies, steel-mills and demolition contractors throughout the U.S. since 1992. T&T Valves & Surplus prides itself on being a one-stop company for all ... »
4.21.2008 / Tony (Houston, Texas)
Website |
SAM - $400.00
PT.air condicion carriet confort series thru the wall 9700-11600 BTUSwith out cavinet call 919-631-6713
4.21.2008 / Virginia Ellis (Princeton, North Carolina)
Tel: 919-763-4876 Send e-mail |
METAL SHOP/GARAGE LOW PRICE - $6,999.00
** Width: 24’ Length: 25’ Height: 8’ **
**$6,999 Free Delivery **
**1 roll up door included! **
100 pound snow load
**Phone: 800-301-6286 **
**visit us at- WWW.BUILDINGSTOREONLINE.COM **
**Email us- NOTIFICATION@BUILDINGSTOREONLINE.COM **
4.17.2008 / ANDREA (Redding, California)
Send e-mail  |
UPGRADED TEGAL 901E FOR PLASMA ETCHER
Tegal 900 series Plasma/RIE etch System are used by the Semiconductor Industry for integrated circuit fabrication. The system are used in one part of the sequence of manufacturing steps that transfer a pattern formed from a layer of photosensitive material, the photoresist, to a layer that makes up a permanent part of the final device. The process of defining a ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
UPGRADED MATRIX 105 FOR PLASMA ASHER/DESCUM
Matrix 105 provides high throughput in a single wafer system capable of handling wide variety of substrates, including round, square and ranging from 3” up to 6”. By maintaining independent closed-loop system controls, the system optimizes vital device parameters.
Combined with Allwin21 Corp advanced Robot control technology , AW Control Software and Superior Temperature Control Technology , upgraded Matrix 105 provides significant ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
UPGRADED GASONICS AURA1000 FOR PLASMA ASHER
Download Upgraded GaSonic Aura 1000 Technical Documents
Download Upgraded Gasonics Aura 1000 Special Features
GaSonic Aura 1000 Plasma System is the microprocessor controlled down-stream, or “ afterglow” photoresist stripper that will strip the front and backside of a wafer, typically in less than one minute. The unit is fully automated, cassette-to-cassette, and is a single-wafer process design.
Combined ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
PLASMA ETCH/ETCHING/DRY ETCH
Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module, and every wafer undergoes many etching steps before it is complete.
If the etch is intended to make a cavity in a material, the depth of the cavity may be controlled approximately using the etching time and ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
PLASMA ASHER STRIPPER DESCUM
In semiconductor manufacturing plasma asher/stripper is the process of removing the photoresist from an etched wafer. Using a plasma source, a monatomic reactive species is generated. Oxygen or fluorine are the most common reactive species. The reactive species combines with the photoresist to form ashing which is removed with a vacuum pump.
Typically, monatomic (single atom) oxygen plasma is created ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
RAPID THERMAL PROCESS
AW Control Software provides the unique upgrade system for all our main products. The advantages of the upgraded systems include:
Integrated process control system
Real time graphics display
Real time process data acquisition, display, and analysis
Programmed comprehensive calibration and diagnostic functions
Better performance and maintenance than the original systems
Rapid thermal processing (or RTP) refers to a semiconductor manufacturing process ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
CUB CADET RIDING LAWN MOWER - $600.00
This Cub Cadet lawn mower was purchased 1 1/2 years ago for $1500 but since we have moved to town so we do not need a lawn mower. WORKS GREAT! First $600 takes it
3.16.2008 / Kasi Chapman (Guttenberg, Iowa)
Tel: 563-252-2939 Send e-mail |
TROY-BILT GENERATOR - $999.00
7800/13500 watt, 17 HP, OHV, 5 Gallon Tank
Description:
Made by: Troy-Bilt
Overhead Valve Design
Electric Start
Watts: 7800
Peak: 13500
Voltage: 120/240
Fuel Tank: 5 gallon
120 Volts 65.0 Amps
240 Volts 32.5 Amps
CONTACT CHUCK AT 719-473-1587 or JARED AT 719-393-5654
Please leave a message if I’m not available ... »
2.21.2008 / Chmagness (Colorado Springs, Colorado)
Tel: 719-473-1587 Send e-mail  |
REEFER TRAILER - $7,500.00
1996 Great Dane 48 ft reefer trailer, SB III SSR, new batter, virgin rubber, cold.. Cold ..COLD!
2.17.2008 / Janine (Oronogo, Missouri)
Tel: 417-291-4467 Send e-mail Website |
| Member area |
