 Worldwide |
Change location
One second, please ...
 | - Other
|
TWO 1500LBS LOAD CAPACITY 12FT LOADING RAMPS $500/EA OBO - $500.00
JUMP on these while you can! 12 foot length | Heavy Duty | 1500lbs | ALL offers welcome
Two EXCELLENT quality, heavy duty, 1500lbs load capacity loading ramps. They are 12ft long and retail for over $800/ea...Take one for $500 or both for $1000. All offers will be considered, so please don't hesitate to e-mail an offer!! Local delivery available ... »
5.22.2008 / WayWestTrading (Los Angeles, California)
Send e-mail |
METAL SHOP/GARAGE LOW PRICE - $6,999.00
** Width: 24’ Length: 25’ Height: 8’ **
**$6,999 Free Delivery **
**1 roll up door included! **
100 pound snow load
**Phone: 800-301-6286 **
**visit us at- WWW.BUILDINGSTOREONLINE.COM **
**Email us- NOTIFICATION@BUILDINGSTOREONLINE.COM **
4.17.2008 / ANDREA (Redding, California)
Send e-mail  |
UPGRADED TEGAL 901E FOR PLASMA ETCHER
Tegal 900 series Plasma/RIE etch System are used by the Semiconductor Industry for integrated circuit fabrication. The system are used in one part of the sequence of manufacturing steps that transfer a pattern formed from a layer of photosensitive material, the photoresist, to a layer that makes up a permanent part of the final device. The process of defining a ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
UPGRADED MATRIX 105 FOR PLASMA ASHER/DESCUM
Matrix 105 provides high throughput in a single wafer system capable of handling wide variety of substrates, including round, square and ranging from 3” up to 6”. By maintaining independent closed-loop system controls, the system optimizes vital device parameters.
Combined with Allwin21 Corp advanced Robot control technology , AW Control Software and Superior Temperature Control Technology , upgraded Matrix 105 provides significant ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
UPGRADED GASONICS AURA1000 FOR PLASMA ASHER
Download Upgraded GaSonic Aura 1000 Technical Documents
Download Upgraded Gasonics Aura 1000 Special Features
GaSonic Aura 1000 Plasma System is the microprocessor controlled down-stream, or “ afterglow” photoresist stripper that will strip the front and backside of a wafer, typically in less than one minute. The unit is fully automated, cassette-to-cassette, and is a single-wafer process design.
Combined ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
PLASMA ETCH/ETCHING/DRY ETCH
Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module, and every wafer undergoes many etching steps before it is complete.
If the etch is intended to make a cavity in a material, the depth of the cavity may be controlled approximately using the etching time and ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
PLASMA ASHER STRIPPER DESCUM
In semiconductor manufacturing plasma asher/stripper is the process of removing the photoresist from an etched wafer. Using a plasma source, a monatomic reactive species is generated. Oxygen or fluorine are the most common reactive species. The reactive species combines with the photoresist to form ashing which is removed with a vacuum pump.
Typically, monatomic (single atom) oxygen plasma is created ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
RAPID THERMAL PROCESS
AW Control Software provides the unique upgrade system for all our main products. The advantages of the upgraded systems include:
Integrated process control system
Real time graphics display
Real time process data acquisition, display, and analysis
Programmed comprehensive calibration and diagnostic functions
Better performance and maintenance than the original systems
Rapid thermal processing (or RTP) refers to a semiconductor manufacturing process ... »
4.7.2008 / Peter (Santa Clara, California)
Tel: 408-988-5188 Send e-mail Website |
 more photos | PRO 1911 INDUSTRIAL ULTRASONIC TABLETOP PARTS WASHER - $2,495.00
Pro 1911 Industrial Ultrasonic Tabletop Parts Washer
This unit is among our most popular ultrasonic parts washers in the motorsports and automotive industries. From carburetors, engine cases, and fuel injectors, to pistons, cylinder heads, and valve bodies, the Pro 1911 will provide the cleaning your looking for. At 600 watts of ultrasonic power, a working gallon capacity of approximately 7.5 ... »
1.28.2008 /  David (Simi Valley, California)
Send e-mail Website |
TIRE EQUIPMENT FOR SALE - $15,000.00
everything to start your own tire shop business.
selling
1,500 used tires (all sizes)
3 tire changers
3 floor jacks
1 tire balancer
1 heavy duty air compressor
comes with heavy duty impact gun for semi trucks
1 med duty gun
3 small gun's for reg car's
1 tire inflation cage
much much more to list?
all equipment ... »
12.31.2007 / JOE (Sylmar, California)
Tel: (818) 744-2161 |
WASTE OIL HEATERS - $3,300.00
WASTE OIL HEATERS- burn your used motor and cooking oil, heats up to 5000 sq. feet. Save money on heating cost. NEW, Free shopping, $3300.00
11.10.2007 / Daniel duke (Redlands, California)
Tel: 909-991-9660 Send e-mail Website   |
| Member area |
